Enterasys VHSIM2-A6DP Uživatelská příručka stáhnout pdf (Strana 241)

100

101

Static VLAN Egress Configuration Screen

802.1Q VLAN Configuration Menu Screens 8-13

3. To change the egress type on more than one port, repeat the first two steps for each port.

4. After the changes are complete, use the arrow keys to highlight the SAVE command at the

bottom of the screen.

5. Press ENTER. The message “SAVED OK” displays and the settings are saved.

Setting the Same Egress Type on All Ports Simultaneously

1. Use the arrow keys to highlight the SET ALL PORTS field. The following message appears at

the top of the screen:

TOGGLE TO DESIRED SELECTION AND HIT <RETURN> TO PROPAGATE

SELECTION TO PORTS

2. Press the SPACE bar to step to the appropriate egress type (UNTAGGED, TAGGED, or NO)

and press ENTER.

3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4. Press ENTER. The message “SAVED OK” displays and the screen refreshes showing all ports

associated with the VLAN that are set to the selected egress type.

8.4.2 Displaying the Next Group of Ports

Up to 32 ports can be displayed on the screen. If there are more than 32 ports associated with the

VLAN, additional screens will contain the additional list of ports.

To display the additional port settings that do not display in the current screen, use the NEXT or

PREVIOUS commands, as follows:

1. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the

entries on the next screen.

2. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to

view the entries on the previous screen.

NOTE: The NEXT and PREVIOUS fields will only display if there are further egress lists

to page through.

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 435 436

Komentáře k této Příručce

Žádné komentáře

Enterasys VHSIM2-A6DP Uživatelská příručka Strana 241

Komentáře k této Příručce

Související produkty a manuály pro Sítě Enterasys VHSIM2-A6DP